CCNA 200-301

$5.00

  • Released : May 23, 2019
  • Last Updated : September 22, 2020
  • Categories : Enterprise Network

Goals & Objectives

The Cisco SD-WAN Solutions (SDWAN300) Certification Labs helps you practice for the Cisco Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) Examination. The Labs covers configuring advanced network components such as EIGRP,OSPF, OSPFv3 for IPv4 and IPv6, PBR, BGP, IBGP and External Border Gateway Protocol (EBGP), VRF-Lite, IOS DMVPN, Redistribution, DHCPv4 and DHCPv6, uRPF, IPv4 and IPv6 Access Control List. The Cisco Enterprise Advanced Routing and Services (ENARSI) lab is completely virtual with the freedom to access from anywhere, anytime, removing any hardware dependencies associated with physical infrastructure.


How to Access Labs

myclabs.cloud Labs can be accessed in just three simple clicks. You are required to have only a high-speed internet to access the labs.

Step 1: Purchase the desired Labs

Step 2: Log in to our Racks through the Internet.

Step 3: Click on Lab and start the practicals.


Labs Outline

  • Get Started with Cisco Command-Line Interface (CLI)
  • Observe How a Switch Operates
  • Perform Basic Switch Configuration
  • Implement the Initial Switch Configuration
  • Inspect TCP/IP Applications
  • Configure an Interface on a Cisco Router
  • Configure and Verify Layer 2 Discovery Protocols
  • Implement an Initial Router Configuration
  • Configure Default Gateway
  • Explore Packet Forwarding
  • Troubleshoot Switch Media and Port Issues
  • Troubleshoot Port Duplex Issues
  • Configure Basic IPv6 Connectivity
  • Configure and Verify IPv4 Static Routes
  • Configure IPv6 Static Routes
  • Implement IPv4 Static Routing
  • Implement IPv6 Static Routing
  • Configure VLAN and Trunk
  • Troubleshoot VLANs and Trunk
  • Configure a Router on a Stick
  • Implement Multiple VLANs and Basic Routing Between the VLANs
  • Configure and Verify Single-Area OSPF
  • Configure and Verify EtherChannel
  • Improve Redundant Switched Topologies with EtherChannel
  • Configure and Verify IPv4 ACLs
  • Implement Numbered and Named IPv4 ACLs
  • Configure a Provider-Assigned IPv4 Address
  • Configure Static NAT
  • Configure Dynamic NAT and Port Address Translation (PAT)
  • Implement PAT
  • Log into the WLC
  • Monitor the WLC
  • Configure a Dynamic (VLAN) Interface
  • Configure a DHCP Scope
  • Configure a WLAN
  • Define a Remote Access Dial-In User Service (RADIUS) Server
  • Explore Management Options
  • Explore the Cisco DNA™ Center
  • Configure and Verify NTP
  • Configure System Message Logging
  • Create the Cisco IOS Image Backup
  • Upgrade Cisco IOS Image
  • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-shared Key (PSK) Using the GUI
  • Secure Console and Remote Access
  • Enable and Limit Remote Access Connectivity
  • Secure Device Administrative Access
  • Configure and Verify Port Security
  • Implement Device Hardening

Frequently Asked Questions

Do I need any Remote Desktop Tool (RDP) to access the Labs?

No, you do not require any Remote Desktop Tool (RDP) or any other tool to access these labs. You will be provided with login ID and Password and you can log in and access the labs right away.

Do I need to install any kind of software in my machine to access the labs?

No, you do not require to install any software in your machine. You require only high-speed internet to access the labs.

How do I contact for support?

Sometimes, you just need a bit of help. Luckily, our wonderful Support team is always at the ready. You can reach our support team by writing at [email protected] Our support team works Monday-Friday from 8 AM-6 PM Eastern Time. Our Team can take up to 48 working hours to respond to your issue.

How long do I have access to the Labs?

Labs are purchased in hours, the timer starts when you click Start Lab. You can check the Lab access time in your dashboard once you login to the lab portal. The lab will ends when the timer runs out.

What if I run out of time and need more hours of access?

You can always reach our customer support at [email protected] for additional hours of lab access or you can directly purchase the labs from the website page.

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.